Maintenance work on chassis and engine – KTM Supermoto 690 User Manual
Page 84
MAINTENANCE WORK ON CHASSIS AND ENGINE
82
ದ
Position the spacing sleeves
b
. Mount and tighten screws
b
.
Specification
Screw, front brake caliper
M10x1.25
45
bNm
(33.2
blbfbft)
Loctite
®
243™
100168-10
ದ
Operate the hand brake lever several times until the brake pads are lying correctly on
the brake disc.
ದ
Take the front from the work stand. (
P. 56)
ದ
Pull the front wheel brake and push down hard on the fork several times to align the
fork legs.
ದ
Fully tighten screw
b
.
Specification
Screw, fork stub
M8
15
bNm (11.1blbfbft)
ದ
Taking rear from work stand. (
P. 57)
Removing rear wheel
b
x
ದ
Jack up the rear of the motorcycle. (
P. 57)
100144-10
ದ
Remove nut
b
. Remove chain adjuster
b
. Holding the rear wheel, withdraw the wheel
spindle
b
.
ದ
Push the rear wheel forwards as far as possible and take the chain off the rear sprocket.