Troubleshooting – KTM Supermoto 690 User Manual

Page 129

Advertising
background image

TROUBLESHOOTING

127

Faults

Possible cause

Measure

Engine has too little power.

Fuel filter very dirty

Have the fuel filter changed.

Defect in fuel injection system

Read the error memory with the KTM
diagnostics tool and correct the fault.

Engine overheats.

Too little coolant in cooling system

Check the cooling system for leakage.

Check the coolant level. (

P. 109)

Radiator fins very dirty

Clean radiator fins.

Foam formation in cooling system

Drain the coolant.

b

x

(

P. 110)

Fill/bleed the cooling system.

b

x

(

P. 111)

Buckled or damaged radiator hose

Have the radiator hose changed.

Thermostat defective

Have thermostat removed and checked.

Specification
Opening temperature: 70

b°C (158b°F)

Fuse

b5 blown

Change the fuses of individual power
consumers. (

P. 97)

Defect in radiator fan system

Have the radiator fan system checked.

Air in cooling system

Fill/bleed the cooling system.

b

x

(

P. 111)

FI

bwarning lamp (MIL) lights/flashes

Defect in fuel injection system

Read the error memory with the KTM
diagnostics tool and correct the fault.

Engine dies during the journey

Lack of fuel

Fill up with fuel. (

P. 51)

Fuse

b1,b2 orb4 blown

Change the fuses of individual power
consumers. (

P. 97)

High oil consumption

Engine vent hose bent

Route the vent hose without bends or
replace it if necessary.

Advertising