Kathrein UFC 861si - Manual (Page 105)

105
CONNECTING UP THE VIDEO/PVR
For details on how to connect your external recorder to the receiver refer to the connection diagram provided
at the end of this manual and the instructions for the external recorder.
For VCR recording, the UFC 861 must be switched on or the timers must be pre-programmed and the
receiver be set to the channel to be recorded. During the recording the remote control must not be operated,
since all displays would be included on the recording.
You must fi rst set the Scart socket of the UFC 861 to “VCR mode” by pressing the

 button while the
receiver is in operation in order for your TV set to automatically play back the picture from the external
recorder.
In this setting, the picture from the external recorder is switched through to the TV set during playback.
Pressing the

button again restores priority to the signal from the UFC 861.
Note: The system ensures that the same video and audio signal is present at the TV and VCR Scart
sockets. The signal output format ah the TV Scart socket may however differ from that at the
VCR Scart socket. The setting of the format output from the TV Scart socket can be set in
the menu (“System Parameters”, “TV Settings”, “AV Settings” “Video output” or in the First
Installation). The format “FBAS” is output as standard at the VCR Scart socket.
VIDEO/PVR RECORDER RECORDING
VIDEO/PVR RECORDER PLAYBACK