Kathrein UFC 861si - Manual (Page 45)

45
Use the

buttons to select whether automatic time-shifting is enabled or disabled. When you select
“On” the receiver automatically (in the background) starts recording the programme you are viewing as soon
as you switch to the channel. Then, in manual record mode, you can press the

(red) button to choose
whether to record the programme from the current time or from the time you switched to the channel. The
advantage of this is that you do not lose the part of the programme you were watching before you decided
to record it! When you select “Off” you can only record the programme as from the point you press Record,
and lose the portion of the programme before you started recording.
AUTOMATIC TIME-SHIFT
USER SETTINGS
Use the

buttons to select whether hard disk management is controlled by the receiver (“Automatic”)
or by you (“Manual”).
If you select “Automatic”, the receiver automatically deletes older recordings when it reaches the maximum
disk capacity, so as to make room for planned recordings (you can, however, protect recordings from being
deleted by the receiver, as described in the “Recording List” section under “Edit Recordings” - “Deletion
Block”).
If you select “Manual” you must always ensure there is suffi cient hard disk capacity yourself. If the available
disk capacity falls below fi ve percent, a warning appears the next time you restart the unit.
HARD DISK MANAGEMENT
Use the

buttons here to select the size of the background buffer the receiver makes available for
time-shift recording. You can choose between 1 and 8 GB, in 1 GB increments. The receiver indicates in
brackets after the GB fi gure how long it will take to record it in background.
TIME-SHIFT BUFFER SIZE
ONE-TOUCH RECORDING INFO WINDOW
Use the

buttons here to select whether to enable on-screen display of the
advanced recording settings on starting (press the

(red) button) or not. If you select
“Disable”, in manual recording mode, time-shift recording is automatically started
(see “Recording” section). Other recording modes are then excluded.
On this menu you can make settings for your recordings and for time-shifting.
PVR SETTINGS