Kathrein UFC 861si - Manual (Page 64)

64
• Recording status (once, daily, weekly, user-defi ned, series) - selected using the

buttons.
• Date (advanced day-by-day) - selected using the

buttons.
• Start time (advanced minute-by-minute) - selected using the

buttons or entered directly using the
numeric pad.
• End time (advanced minute-by-minute) - selected using the

buttons or entered directly using the
numeric pad
• Decoding (only for encrypted channels) - Use the

buttons to select if the recording is to be saved
to the hard disk after having been previously decoded (“Yes”) or in encrypted form (“No”). For the setting
“Yes”, the CI slot must be fi tted with a CA module possessing a Smartcard for the channel to be decod-
ed.
In user-defi ned recording you can use the

buttons to move to the various days of the week and
press the button to activate and deactivate them.
Press to load and save the selected recording data.
If the timer recording you are programming overlaps with one or more recordings already programmed,
you will see the following message (example):
Note: You can also change the data and settings of timer recordings you have programmed from the
timer list by pressing the button! Edit data by the same method used to input them.
Press the to return to the listing and edit your input accordingly. The recordings in black are the ones
already stored. The one in white is the one you are currently programming which cannot be entered because
of other existing recordings.
If you nevertheless want to programme the recording shown in white, you can edit or delete the pre-
programmed recordings.
When recording to the
hard disk the signal is
not forwarded to the
VCR Scart socket!
Also, when recording to a VCR
or PVR, note that most digital
TV signals do not contain a VPS
signal.
You must therefore always
programme your external video
or PVR to match the timer
settings.
ELECTRONIC PROGRAMME GUIDE (EPG)