Kathrein UFC 861si - Manual (Page 83)

83
RECORDING LIST
The receiver automatically starts playing back the recording. You now have several options for specifying the
range to be copied (see example bar):
Start Middle End
To set the exact times for the start and end markers of the copy range as quickly as possible you can use
various buttons as aids:
- Use the

buttons to rewind or fast forward at up to 24 times playback speed (you can only fast
forward recordings which have not yet been decoded at 4 times playback speed and rewind them at 2
times playback speed)
- You can use the

button to pause the playback and view a freeze-frame (pressing the

button starts
the slow motion forwards wind (7 steps obtainable by repeatedly pressing the

button))
- Use the

buttons to jump forward or backwards in 30-second blocks
Copy the range marked “Start” as follows:
- Move to the end of the range you want to copy and press the

button. Then press the
!
(green)
button to set the start point marker of the range to be copied. The receiver automatically marks the full
range back to the start of recording. Then press the (red) button to set the end marker at the end of the
recording range you want to copy.
Copy the range marked “Middle” as follows:
- Move to the start of the range you want to copy and press the

button. Then press the (red) button
to set the start point marker of the range to be copied. Then move on to the end of the copy range.
Press the

button again and the (red) button to set the end marker.
Also note the bars
at the bottom of the
on-screen display!
These provide
information on
what to do next.