Kathrein UFC 861si - Manual (Page 71)

71
RECORD
You can start recording the programme as from the point you switched to the channel in question simply
by pressing the button, or you can simply wait the 5 seconds for automatic recording to begin. If you
want to alter the end time or recording duration, you can do so as described under “Duration/End” before
pressing to start recording.
Duration/End
You can specify the duration of a recording regardless of when it starts. The receiver automatically
retrieves the end time of the programme you are currently viewing from the EPG data (where available)
and inserts it in the “Duration” fi eld. Otherwise the end time is based on the default duration you set on
the “User Preference” menu under “PVR Settings”. If your programmed recording overlaps with another
scheduled recording, the end time of the current recording is matched to the start time of the one
already scheduled. To change the recording duration, use the

buttons to move to the “Duration”
fi eld and use the

buttons to select the time after which you want recording to stop automatically.
Press the
"
(yellow) button to shorten the recording by 10 minutes and the
#
(blue) button to extend it by
10 minutes.
When you have fi nished making your settings, use the

buttons to select “OK” and press the button
to start recording. If the end time still overlaps with the start time of a scheduled recording, the receiver
automatically switches to the tvtv-EPG's timer list, where you can delete, cancel or edit one of the two
programmed recordings listed.
You can also cancel a recording at any time by pressing the

button.
Note: The “Decoding” line is shown only when recording an encrypted channel.
When recording
starts, only the
data of the current
programme is
recorded. The
programme running
before you switched channels
is not recorded.