Kathrein UFC 861si - Manual (Page 73)

73
Duration/End
You can specify the duration of a recording regardless of when it starts. The receiver automatically
retrieves the end time of the programme you are currently viewing from the EPG data (where available)
and inserts it in the “Duration” fi eld. Otherwise the end time is based on the default duration you set on
the “User Preference” menu under “PVR Settings”. If your programmed recording overlaps with another
scheduled recording, the end time of the current recording is matched to the start time of the one
already scheduled. To change the recording duration, use the

buttons to move to the “Duration”
fi eld and use the

buttons to select the time after which you want recording to stop automatically.
Press the
"
(yellow) button to shorten the recording by 10 minutes and the
#
(blue) button to extend it by
10 minutes.
When you have fi nished making your settings, use the

buttons to select “OK” and press the button
to start recording. If the end time still overlaps with the start time of a scheduled recording, the receiver
automatically switches to the tvtv-EPG's timer list, where you can delete, cancel or edit one of the two
programmed recordings listed.
Decoding (see previous page)
You can also cancel a recording at any time by pressing the

button.
RECORD
SETTING BOOKMARKS DURING THE RECORDING
During the recording you can set bookmarks, as described below under “Bookmarks”. This allows you to set
bookmarks at specifi c points of the recording, so that when you view the recording on subsequent occasions
you can skip certain parts of the programme, such as the commercial breaks.
If there is an overlap with another scheduled or ongoing recording, this fact is
indicated. The receiver then presets the end time for your new recording as the start
time of the overlapping programme (see “Duration/End” above).