Scanning, Scanning a document, Understanding the scan mode menu – Lexmark 9500 Series User Manual
Page 142
Scanning
Scanning a document
1
Make sure the printer is connected to a computer, and both the printer and the computer are on.
2
Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the Automatic Document Feeder (ADF). Place these items on the scanner glass.
3
From the control panel, press
or
repeatedly until Scan is highlighted.
4
Press
.
5
If your printer is connected to more than one computer:
a
Press
or
repeatedly until the computer to which you want to scan is highlighted.
b
Press .
If you set a PIN during network setup and are being asked for it:
1
Enter the PIN using
and
to select a digit location and
and
to select a value for that digit.
2
Press .
6
Wait until the printer has finished downloading the scan applications list.
7
Make your selections using the control panel buttons.
8
Press
.
9
Follow the instructions on your computer screen.
Understanding the Scan Mode menu
1
From the control panel, press
or
repeatedly until Scan is highlighted.
2
Press .
3
If your printer is connected to more than one computer:
a
Press
or
repeatedly until the computer to which you want to scan is highlighted.
b
Press .
If you set a PIN during network setup and are being asked for it:
1
Enter the PIN by pressing
and
to select a digit location, and then press
and
to select a value
for that digit.
2
Press .
4
Wait until the printer has finished downloading the scan applications list.
Scanning
142