Lexmark 9500 Series - Manual (Page 195)

C
HECK YOUR ADVANCED SECURITY SETTINGS
• If you are using MAC address filtering to limit access to your wireless network, you must add the printer MAC
address to the list of addresses allowed to connect to your wireless access point (wireless router).
• If you set your wireless access point (wireless router) to issue a limited number of IP addresses, you must change
this so that the printer can be added.
Note: If you do not know how to make these changes, see the documentation that came with the wireless network,
or contact the person who set up your wireless network.
Wi-Fi indicator light is still orange
When the Wi-Fi indicator light is orange, it may indicate that the printer is:
• Connected to the computer with a USB cable
• Being configured for use on the wireless network
• Not configured in infrastructure mode
• Waiting to be configured for ad hoc mode
The printer may be unable to join the network because of interference or its distance from the wireless access point
(wireless router), or until its settings are changed.
These are possible solutions. Try one or more of the following:
C
HECK CABLE
Make sure the installation cable is not connected to the printer.
C
HECK NETWORK NAME
Make sure your network does not have the same name as another network near you. For example, if you and your
neighbor both use a manufacturer's default network name, your printer could be connecting to your neighbor's
network.
If you are not using a unique network name, consult the documentation for your wireless access point (wireless
router) to learn how to set a network name.
If you set a new network name, you must reset the printer and computer SSID to the same network name.
For more information, see “Checking your network name” on page 200.
C
HECK SECURITY KEYS
Make sure security keys are correct. For more information, see “Check your security keys” on page 193.
M
OVE YOUR COMPUTER AND
/
OR PRINTER
Move the computer and/or printer closer to the wireless access point (wireless router). Although the possible
distance between devices in 802.11b or 802.11g networks is 300 feet, the effective range for optimal performance
is generally 100–150 feet.
C
HECK
MAC
ADDRESS
If your network uses MAC address filtering, make sure that you include the MAC address of the printer in the MAC
address filter list. This will allow the printer to operate on the network. For more information, see “Finding the MAC
address” on page 56.
Troubleshooting
195