Lexmark 9500 Series - Manual (Page 223)

• Transparencies or photos contain white lines
• Glossy photo paper or transparencies stick together
Cannot print from digital camera using PictBridge
These are possible solutions. Try one or more of the following:
E
NABLE
P
ICT
B
RIDGE PRINTING FROM CAMERA
Enable PictBridge printing on the camera by selecting the correct USB mode. If the camera USB selection is incorrect,
the camera will be detected as a USB storage device, or an error message will be displayed on the control panel of
the printer. For more information, see the digital camera documentation.
M
AKE SURE THE CAMERA IS A
P
ICT
B
RIDGE
-
ENABLED DIGITAL CAMERA
1 Disconnect the camera.
2 Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera documentation to
determine whether it is PictBridge-enabled.
C
HECK
USB
CABLE
Use only the USB cable that came with the camera.
R
EMOVE MEMORY CARDS
Remove any memory cards from the printer.
C
HECK MESSAGES
If an error message appears on the display, see “Error messages on the computer screen” on page 256.
Cannot print from a Bluetooth-enabled device
If you are having trouble printing from a Bluetooth-enabled device, these are possible solutions. Try one or more of
the following:
M
AKE SURE THAT THE
B
LUETOOTH MODE AND THE
B
LUETOOTH
D
ISCOVERY
M
ODE ARE
ENABLED ON YOUR PRINTER
1 From the control panel, press or repeatedly until Setup is highlighted.
2 Press .
3 Press or repeatedly until Change Bluetooth Default Settings is highlighted.
4 Press .
The Bluetooth Default Settings menu appears with Bluetooth Enabled highlighted.
5 Press or until On appears.
6 Press or repeatedly until the option for Discovery Mode is highlighted.
Troubleshooting
223