Lexmark 9500 Series - Manual (Page 25)

3 4
6
8
1
2
7
5
9
Use the To
1 Scanner unit Access the print cartridges.
2 Print cartridge carrier Install, replace, or remove a print cartridge.
3 Ethernet port Connect your computer to another computer, a local network, an external
DSL, or cable modem.
4 LINE port Connect the printer to an active telephone line to send and receive faxes. The
printer must be connected to a telephone line to receive incoming fax calls.
Note: Do not connect additional devices to the LINE port, and do not connect
a DSL (digital subscriber line), ISDN (integrated services digital network), or
cable modem to the printer.
5 EXT port Connect additional devices, such as a data/fax modem, telephone, or
answering machine, to the printer. This connection method may not be
available in all countries or regions.
Note: Remove the plug to access the port.
6 USB port Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when
plugging in or removing a USB cable or installation cable.
7 Duplex unit • Print on both sides of the paper automatically.
• Pull out to remove paper jams in the duplex unit.
8 Power supply with port Connect the printer to a power source. Plug the power cord into the power
supply at the back of the printer and then into the wall outlet.
9 Internal wireless print server Communicate with other devices on a wireless network.
Setting up the printer
25