Lexmark 9500 Series - Manual (Page 214)

White lines appear in graphics or solid black areas
These are possible solutions. Try one or more of the following:
A
DJUST THE QUALITY SETTING ON THE
P
RINT
S
ETUP TAB IN
P
RINTING
P
REFERENCES
• For excellent print quality and reduced print speed, select Best.
• For good print quality and average print speed, select Normal.
• For reduced print quality and faster print speed, select Quick Print.
• To have the printer determine the quality and speed according to media type, select Automatic.
A
DJUST THE PROGRAM SETTINGS FOR THE DOCUMENT
Use a different fill pattern in the program. For more information, see the program documentation.
P
ERFORM MAINTENANCE ON THE PRINT CARTRIDGES
You may need to clean the print cartridge nozzles.
Checking the printer status
Windows Vista users only
1 Click ΠControl Panel.
2 On the Control Panel menu, under Hardware and Sound, click Printer.
3 Make sure:
• The printer icon does not say “Paused.” If the printer is paused, right-click the icon, and then click Resume
Printing.
• The printer icon says “Ready.” If it says “Offline,” right-click the icon, and then click Use Printer Online.
• The printer icon has a check mark indicating that the printer is set as the default printer. If it is not set as the
default printer, right-click the icon, and then click Set as Default Printer.
Windows XP users only
1 Click Start ŒSettings ŒPrinters or Printers and Faxes.
2 Make sure:
• The printer icon does not say “Paused.” If the printer is paused, right-click the icon, and then click Resume
Printing.
• The printer icon says “Ready.” If it says “Offline,” right-click the icon, and then click Use Printer Online.
• The printer icon has a check mark indicating that the printer is set as the default printer. If it is not set as the
default printer, right-click the icon, and then click Set as Default.
Windows 2000 users only
1 Click Start ŒSettings ŒPrinters.
2 Right-click the Lexmark 9500 Series icon.
Troubleshooting
214