Lexmark 9500 Series - Manual (Page 187)

Troubleshooting
If you set up your printer on a wireless network, make sure:
• The wireless network is working properly.
• The computer and printer are both connected to the same wireless network.
• The printer is within the range of the wireless network. The effective range for optimal performance is generally
100–150 feet.
• The printer is located away from other electronic devices that may interfere with the wireless signal.
• The power supply is connected to the printer, and is lit.
• The Wi-Fi indicator light is green.
• The printer driver is installed on the computer from which you are performing a task.
• The correct printer port is selected.
Setup troubleshooting
Incorrect language appears on the display
Selecting a language during initial setup
1 Press or repeatedly until the language you want appears on the display.
2 Press .
Selecting a different language after initial setup
1 Press to turn the printer off.
2 Press once, and then immediately press and hold and .
The light blinks as the printer comes on. The Initial Setup menu appears.
3 Release the buttons.
4 Press or repeatedly until the language you want appears on the display.
5 Press .
Power button is not lit
These are possible solutions. Try one or more of the following:
P
RESS POWER BUTTON
Make sure the printer is on by pressing .
Troubleshooting
187