Liebert GXT2-6000RTL630 - Manual (Page 8)

Introduction
4
1.0 I
NTRODUCTION
Congratulations on your choice of the Liebert GXT2-6000RTL630 Uninterruptible Power Supply
(UPS). It provides conditioned power to microcomputers and other sensitive electronic equipment.
Upon generation, AC power is clean and stable. However, during transmission and distribution it
may be subject to voltage sags, spikes or complete power failure that may interrupt computer opera-
tions, cause data loss or even damage equipment. The GXT2-6000RTL630 protects equipment from
these disturbances.
The GXT2-6000RTL630 comes in a nominal power rating of 6000 VA. Complete model specifications
appear at the end of this manual.
The GXT2-6000RTL630 is a compact, on-line UPS. An on-line UPS continuously conditions and regu-
lates its output voltage, whether utility power is present or not. It supplies connected equipment with
clean sinewave power. Sensitive electronic equipment operates best from sinewave power.
For ease of use, the GXT2-6000RTL630 features a light-emitting diode (LED) display to indicate both
load percentage and battery capacity. It also provides self-diagnostic tests, a combination ON/Alarm
Silence/Manual Battery Test button, a Standby button, user configurable program, and two levels of
alarms when the unit is operating on battery.
The GXT2-6000RTL630 has an interface port for communication between the UPS and a network
server or other computer systems. This port provides detailed operating information including volt-
ages, currents, and alarm status to the host system when used in conjunction with Liebert Multi-
Link™ software. MultiLink software can also remotely control UPS operation.