Lexmark C762 - Manual (Page 122)

PJL
3-43
LPRINTQUALITY Print Quality
Mode QUICKPRINT, NORMAL, PRESENTATION,
GRAPHICS, IMAGES, 1200IMAGEQ, INKSAVER,
NORMAL, BEST NORMAL
LPUNCH Hole Punch ON, OFF OFF
LREAROUTBINNAME Rear Output Bin
Name "name"
name is a variable that allows for custom naming of
optional output bins. The text string is truncated to 24
characters.
When queried, the quotes are not returned around the
string name. The default name is returned unless you
have specified a custom name.
REAROUTBIN
LREPEATPRINTLIMIT
(DEFAULT only)
Print and Hold
Repeat Print
Job Limit 0 to 50 jobs
Specifies the number of Repeat Print jobs that can be
held in printer memory.
If the Repeat Print Job Limit setting is not equal to 0, a
DINQUIRE or INQUIRE returns the numerical setting
for LREPEATPRINTLIMIT. If Repeat Print Job Limit
setting is set to Disabled, a DINQUIRE or INQUIRE
returns 0.
5
LRESET Reset Control ON, OFF
When the LRESET variable is set to ON, R ESET
P RINTER is available in the JOB MENU when the
printer is in the Busy or Waiting state. This is true for
most printers with a printer operator panel.
If this variable is set to OFF, R ESET P RINTER is not
available.
ON
LRESOURCESAVE
(DEFAULT only)
Resource Save ON, OFF OFF
LRIGHTMARGINOFFSET Right Margin
Offset -10 to 10 0
LSCREENING Color
Screening
Selections COLORGRADE, IMAGESONLY, IET COLORGRADE
LSEPARATORSHEETS Indicates where
separator
sheets are
placed within
the print job NONE, BETWEENCOPIES, BETWEENJOBS,
BETWEENPAGES NONE
LSEPARATORSOURCE Indicates which
source contains
the separator
sheets TRAY1, TRAY2, TRAY3, TRAY4, TRAY5, FEEDER,
MPFEEDER, MANUALPAPER, MANUALENVELOPE TRAY1
Table 3-4: Printer Unique Variables for Both Printer Languages (Continued)
Variable Function Selections Factory Default