Lexmark C762 User Manual

Page 53

Advertising
background image

PCL

2-41

ESC

&a#R

# = number of Rows

1

Vertical Cursor Position (in Rows)

Moves the cursor to a new position along the vertical axis.

Note:

Row height is determined by either the Vertical Motion Index

(VMI) or the Set Line Spacing Command.

ESC

&a#V

# = number of Decipoints

1

(1 Decipoint = 1/720 inch)

Vertical Cursor Position (in Decipoints)

Moves the cursor to a new position along the vertical axis.

ESC

*p#Y

# = number of PCL Units

1

Vertical Cursor Position (in PCL Units)

Moves the cursor to a new position along the vertical axis.

Note:

PCL units are set by the Unit-of-Measure Command.

ESC

=

Half Line-Feed

Moves the cursor down 1/2 line (1/2 of the current VMI).

ESC

&k#G

0

CR=CR, LF=LF, FF=FF (Default)

1

CR=CR+LF, LF=LF, FF=FF

2

CR=CR, LF=CR+LF, FF=CR+FF

3

CR=CR+LF, LF=CR+LF, FF=CR+FF

Set Line Termination

Controls how the printer responds to the Carriage Return (CR), Line
Feed (LF), and Form Feed (FF) control codes.

ESC

&f#S

0

Push

1

Pop

Push / Pop Cursor Position

Sets up a cursor position stack for storing and recalling various cursor
positions. The stack can store up to 20 cursor positions.

Table 2-14: Cursor Positioning (Continued)

Command / Parameters

Function / Result

1

Parameter preceded by + or - sign denotes a relative cursor move from the current cursor position. Parameter without a

sign denotes an absolute cursor move from the top left margin.

Advertising
This manual is related to the following products: