Lexmark C762 - Manual (Page 83)

PJL
3-4
Job Separation Commands
Your printer supports the PJL JOB and EOJ commands. When the printer receives a
JOB command, the print timeout is multiplied by 10; when the printer receives a PJL
EOJ command, the print timeout is reset to the user default. The
Waiting message
appears on the printer operator panel display or through MarkVision Professional until
an EOJ command is received or until the print timeout expires.
Your printer also supports the PASSWORD parameter for the PJL JOB command.
JOB Command
The host computer can use the JOB command to separate print data into various parts
or jobs. Specifically, the JOB command signifies to the printer the start of a print job.
Use the EOJ command to signify the end of a job. In addition, use the JOB/EOJ pair
to accomplish the following:
• Provide a job name (the name displays on the printer operator panel or
through MarkVision Professional).
• Indicate which pages of the job should be printed.
•
Monitor the job status as it prints.
Syntax:
@PJL JOB [NAME = "job name"] [START = first page]
[END = last page] [PASSWORD = number][<CR>]<LF>
Notes:
•
The JOB command should only be used in conjunction with the EOJ
command.
• After receiving a JOB command, the printer does not process a UEL
command as a PJL job boundary until it receives the corresponding EOJ.
Instead, UELs occurring within a JOB/EOJ pair are processed as printer
language resets (for example, PCL
ESC E).