Lexmark C762 - Manual (Page 17)

PCL
2-5
Print Area Menu Item
The printable area is the area on a sheet of paper within which a pel can be printed.
Logical page is a conceptual entity that defines the area in which margins (top, bottom,
left, right) may be set and the area in which the PCL cursor may be positioned.
The physical page border is the actual physical boundaries of a page.
Envelope
90 DL 220 x 110 8.66 x 4.33 2598 5196 2314 4960 142 118 0 100 100
91 C5 229 x 162 9.02 x 6.38 3826 5408 2542 5172 142 118 0 100 100
99 4 , 100 B5 Envelope 250 x 176 9.84 x 6.93 4156 5904 3872 5668 142 118 0 100 100
600 Other
Envelope 216 x 356 8.5 x 14 5100 8400 4800 8160 150 120 0 100 100
89 9 (Com 9) 225 x 98 8.875 x 3.875 2326 5324 2024 5084 150 120 0 100 100
81 10 (Com 10) 241 x 105 9.5 x 4.125 2474 5700 2174 5460 150 120 0 100 100
80 7 3/4
(Mondarch) 2326 4500 2024 4260 150 120 0 100 100
Table 2-1: Lexmark C760 and C762 Paper and Envelope Dimensions
Selection
Paper/Envelope
Dimensions
Dimensions by Area (pels)
1
Page Size
Parameters
2 Name mm inches A B C D E F G H I
1
Pel dimensions are for 600 dpi.
2 Page Size Parameters are explained in Table 2-12 on page 2-36.
3
The width of the logical page for A4 paper can be changed from the printer operator panel or your software
application.
4
Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same
logical paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark
4039.