Postscript, Setdoret, Setdostartpage – Lexmark C762 User Manual
Page 215
PostScript
4-38
setdoret
integer
setdoret —
changes the PQET setting for the next page through the end of the print job.
The integer values allowed are:
0
turn PQET Off
1
turn PQET On
2
turn PQET On
3
turn PQET On
4
turn PQET On
The value you select for PQET returns to the user default setting when the print
job is finished.
This operator is equivalent to executing the following PostScript emulation
sequence:
<<//PostRenderingEnhanceDetails << /REValue integer >> >>
setpagedevice
Errors:
rangecheck, stackunderflow, typecheck
setdostartpage
boolean
setdostartpage
sets the
DoStartPage
system parameter to the value of
boolean
. The
DoStartPage
system parameter must be present for the
setdostartpage
operator to be present. For more information, see “DoStartPage” on page 4-67.
Errors:
invalidaccess, stackunderflow, typecheck