Lexmark C762 - Manual (Page 250)

PostScript
4-73
PSSmartSwitch boolean Supported values are:
True PS SmartSwitch is set to On .
False PS SmartSwitch is set to Off .
For more information, see “Using SmartSwitch” on page 4-1.
Type name (Read-only) Always returns the value of /Communications.
Device Parameters for the Communication Device %Serial%, %SerialA%, %SerialB%, %SerialC%, %SerialD%
(%Serial_NV% and %Serial_Pending% contain the same parameters)
Baud integer Returns the value of the Baud menu item.
CheckParity boolean (Read-only) Designates whether parity checking is done on the incoming data. Supported
values are:
True Parity menu item set to Even or Odd.
False Parity menu item set to None or Ignore.
DataBits integer Returns the value of the Data Bits menu item.
DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are:
True An end-of-file message is not sent until the current job and all preceding jobs
finish printing.
False An end-of-file message is sent as soon as a job finishes executing in the
interpreter, whether or not that job has finished printing.
This value is set independently for each port.
Enabled boolean (Read-only)
Supported values are:
True
False
Filtering name Indicates if the input needs further filtering before the data can be correctly processed.
Supported values are:
InterpreterBased
None
FlowControl name Designates the serial flow control method between the host computer and the device.
Returns a value corresponding to the
Serial Protocol menu item. Supported values are:
Dtr
DtrDsr
XonXoff
XonXoffDtr
XonXoffDtrDsr
HasNames boolean (Read-only) Always returns False.
HonorDSR boolean Serial - Honor DSR. Supported values are:
True Honor DSR is set to On .
False Honor DSR is set to Off .
Table 4-11: PostScript Emulation Device Parameters (Continued)
Key Type Definition