Lexmark C762 - Manual (Page 146)

PJL
3-67
Attendance Conditions
Attendance conditions require operator intervention. Attendance messages are
returned in this form:
CODE=status code
DISPLAY=display string (in double quotes)
ONLINE=online status
To determine which messages your printer supports, see “Table B-11: PJL Messages
for Attendance Conditions” on page B-19.
Table 3-14: PJL Message for Attendance Conditions
Printer State Status Code Display String Online Status
Intervention required:
insert coating roll 40010 30 Coating Roll Missing FALSE
Intervention required:
insert print unit 40010 30 XXXX
1
Print Unit Missing FALSE
Intervention required:
insert hole punch box 40010 Insert Hole Punch Box FALSE
Intervention required:
insert photoconductor cartridge 40010 Insert PC Cartridge FALSE
Intervention required:
printer upper door open 40021 Cover Open or Close Top Covers or
Insert Cartridge or Close Door
FALSE
Intervention required:
close toner box cover 40021 Close Cover A FALSE
Intervention required:
defective print cartridge or defective
ink cartridge 40021 31 Defective Print Cartridge
31 Defective Cartridge XXXX FALSE
Intervention required:
unsupported print cartridge 40021 32 Unsupported Print Cartridge FALSE
Intervention required:
unsupported print cartridge 40021 32 Unsupported XXXX Cartridge FALSE
Intervention required:
unsupported cartridge 40021 32 Unsupported Cartridge FALSE
Intervention required:
change cartridge invalid refill 40021 Change Cartridge Invalid Refill FALSE
Intervention required:
cartridge life expired 40021 Cartridge Life Expired XXXX FALSE
1 XXXX represents a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow and Black cartridges,
respectively. For this message, the values for XXXX are returned to indicate which ink cartridges are defective.
2
<d> represents a one-letter designator for each door labeled on the printer.
3
<c> represents a one-letter designator for each cover labeled on the printer.
Note: The Display String is returned in the current language. A display string that is returned is truncated to the DISPLAY
CHARACTER SIZE returned in INFO CONFIG.