Lexmark C762 - Manual (Page 248)

PostScript
4-71
Device Parameters
The currentdevparams operator returns a dictionary of the current values of the
system parameters.
The setdevparams operator sets the values of the specified device parameters.
• This operator requires a password if one is set.
• Values supplied to setdevparams that are outside the range or limits for the
specified integer parameter do not cause rangecheck or limitcheck errors.
The appropriate value is used.
• Values supplied to setdevparams that do not match the type of the specified
parameter cause typecheck errors.
• If a parameter name is not known, an undefined error occurs.
• An attempt to change the value of a read-only parameter has no effect on the
parameter.
• To specify the parameters for a specific communications channel, use the
appropriate suffix. For example, the serial channels are:
— %SerialA%
— %SerialB%
— %SerialC%
— %SerialD%
For some printers, no “A” channel exists. If %Serial% is specified, it refers to the
channel where the print job is sent.
For additional information on flash memory and disk, see Chapter 6: “Flash Memory
and Disk” on page 6-1.
To determine which devices your printer supports, see Table C-5 on page C-12.
To determine which device parameters your printer supports, see Table C-6 on
page C-14.