Selecting the scan resolution, Selecting the scan resolution -12, Getting started – LG 785 User Manual

Page 48

background image

Getting Started


WorkCentre Pro 665/685/765/785

Selecting the Scan Resolution


Resolution key selects the scan mode for copying, transmitting,

or storing a document in memory. The scan resolution can be set to
one of five settings based on the type of image you are scanning.

To select the Scan Resolution:

Press the

Resolution key until the required resolution mode is

indicated by the Resolution LED.

The default resolution setting is standard only on the base machine.
The machine returns to the default setting after each transaction.

Refer to the

System Administrator’s Guide

for details about changing the

default setting for resolution.

The following table describes the available resolution selections:

If you choose a resolution and the receiving machine does not have
an equivalent, the WorkCentre chooses the next highest resolution
compatible with the remote machine. If you do not know the remote
machines resolution capability, it is recommended that you use the
Direct Send mode when Superfine Photo is selected. In Direct Send
mode, the WorkCentre determines the receive resolution prior to
scanning the document. The document is then scanned at the
compatible receiver resolution resulting in better print quality.


When the resolution LED is not illuminated, the Resolution
setting is Standard.





Use for sending normal text and graphics.

Selected when the Resolution LED is off.


Use for documents with small characters
(newspaper print, etc.).


Use for documents containing very detailed print.

Photo Fine

Use for photos or documents with colors or shading
with low contrast images.

Photo Superfine

Use for very detailed photos or documents with
colors or shading with high contrast images.

This manual is related to the following products:

765, 665, 685