Selecting the scan contrast, Selecting the scan contrast -13, Getting started – LG 785 User Manual
Page 49

Getting Started
WorkCentre Pro 665/685/765/785
4-13
Selecting the Scan Contrast
To select the Scan Contrast:
Press the
Contrast key until the required contrast mode is indicated
by a Contrast LED
The Contrast setting adjusts the print darkness of the copy or
transmitted document. The default contrast setting is normal on base
machine. The machine returns to the default setting after each
transmission.
Refer to the
System Administrator’s Guide
for details about changing the
default setting for contrast.
The following table describes the available contrast selections
Note:
When a Contrast LED is not illuminated, the Contrast
setting is Normal.
Contrast selection
Description
Normal
For documents printed with ordinary image density.
Selected when the Contrast LED is off.
Lighten
For documents with dark print that need to be
adjusted to print lighter.
Darken
For documents with light or faint print that need to be
adjusted to print darker.