LG 785 - Manual (Page 72)

Safety Certification and Environmental Compliance
A-4 WorkCentre Pro 665/685/765/785
manufactured from August 1, 1976. Compliance is mandatory for
products marketed in the United States. The Workcentre Pro is in
compliance with the CDRH regulation.
Third Party Certification
The Xerox WorkCentre Pro 665/685/765/785 is certified by various
bodies in compliance with national and international safety standards.
120v 60Hz Nominal Markets:
Underwriter Laboratories Inc., UL 1950, Third Party Edition.
Within reciprocity agreements which include requirements for Canada
230v, 50 Hz Nominal Markets:
EN60950/IEC60950: 1991 including amendments A1, A2, A3 and A4.
Quality Standards: The product is manufactured under a registered
ISO9002 quality system.
Radio Frequency Emissions USA
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when this equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Changes or modifications to this equipment not specifically approved
by the Xerox Corporation may void the users authority to operate this
equipment.
Shielded cables must be used with this equipment to maintain
compliance with FCC regulations.
WARNING
Shielded cables must be used with this equipment to maintain
compliance with FCC regulations