Lindy 25010 - Manual (Page 21)

2.6.1 Enable/Disable VLAN
In the 802.1Q VLAN page you can enable/disable the tag-based VLAN function by clicking
(Enable) or (Disable) besides the page header:
¾ Enable – to activate the tag-based VLAN function (port-based VLAN function will
automatically be disabled).
¾ Disable – to de-activate the tag-based VLAN function, even though there are some VLAN
entries created. (i.e. any tag-based VLAN entry is still retained although tag-based VLAN
function is disabled. Port-based VLAN function will be auto enabled.)
20