Lindy 25010 - Manual (Page 51)

2.11.2 DHCP Client
The IP address of the 24G web smart switch can be statically assigned by manual entry or
dynamically assigned by a DHCP server.
2.11.2.1 Assign a fixed IP address
Change DHCP Client to be disabled. Enter a fixed IP address, Subnet mask and Gateway, and then
click the Apply button.
2.11.2.2 Assign an IP address by DHCP server
Change DHCP Client to be enabled. The system’s IP address, subnet mask and gateway address will
be assigned and changed immediately by the DHCP server. It may lose the web connection because
of the changing of the system’s IP. Use the console port to get the most current network
configurations after enabling the DHCP function.
The IP address, Subnet mask and Gateway fields will be disabled (read-only) while the DHCP
client is set to Enabled.
50