Lindy 25010 - Manual (Page 59)

„ Upgrade Firmware Via TFTP or BOOTP/TFTP
Type “UF” or “uf” to start the firmware upgrade progress via TFTP server.
Choose “1” to update firmware via TFTP. Enter the TFTP server IP address and firmware
filename.
Choose “2” to update the firmware via BOOTP/TFTP.
Once the 24G web smart switch has rebooted, the firmware upgrade progress has finished
correctly. Type “IG” or “ig” to check the firmware version after login.
„ Reboot System
Type “RB” or “rb” to restart the system.
58