Lindy 25010 - Manual (Page 58)

„ Enable/Disable 802.1Q VLAN
Type “VE” or “ve” to enable or disable the 802.1Q VLAN function.
„ Get 802.1Q VLAN Enable Setting
Type “VF” or “vf” to show if 802.1Q VLAN function is enabled or disabled.
„ Set PVID
Type “VV” or “vv” to set per-port PVID in 802.1Q VLAN function. The PVID of admin
port (port 25) in 802.1Q VLAN function also can be modified. The PVID which the user
wants to set must be one of the existing VLAN group ID.
The Admin port is the port you use to manage the switch function. The Default Admin
PVID is 1.
„ Get PVID
Type “VP” or “vp” to show per-port PVID in 802.1Q VLAN function. The PVID of admin
port (port 25) in 802.1Q VLAN function can also be shown.
57