Lindy 25010 - Manual (Page 50)

2.11.1.2 Firmware Update Via BOOTP/TFTP
Before proceeding with the firmware update, it is required to correctly prepare the BOOTP/TFTP
server and the firmware file which will be uploaded to the switch. (Please refer to the vendor’s
instruction guide for setting up the TFTP server you would like to use).
When the BOOTP/TFTP server and the firmware file are ready, click the Apply button to start the
firmware update through the any front port on the switch.
The time taken for processing the firmware update will be approximately 55 seconds.
49