Lindy 25010 - Manual (Page 22)

2.6.2 802.1Q VLAN Port Configuration
Click the Port number to enter the port configuration page for 802.1q VLAN.
The following figure shows the 802.1Q VLAN Port Configuration page by port. (e.g. Port10)
You can set the individual port for configuring the 802.1q settings in the following fields:
¾ PVID – enter a valid VLAN ID(1-4094), and PVID must be one of the existing VLAN group
ID.
¾ UnTag Frame – Accept or drop incoming untag frames.
¾ Tag Frame – Accept or drop incoming tag frames.
Finally, there are 2 buttons to select:
Apply: To submit the port configuration settings to the switch.
Back: To go back to the 802.1q main setting page.
21