Lindy 25010 - Manual (Page 28)

2.7.1 Trunking Rules
The following rules will limit the configurations for port trunking:
„ The attributes of all trunk member ports in Port Configuration, Mirror, Rate Control, 802.1Q
VLAN and Port-Based VLAN functions must be the same.
„ All trunk member ports can not be a capture port or monitored port in Mirror function.
„ If Port1/Port2 using the fibre media wants to be grouped with the ports using pure copper
(Port3 – Port24) as a trunk port, the auto negotiation option must be set to Enable for all
member ports. If both Port1 & Port2 are the only trunk member ports and they are using fibre
media, the auto negotiation option can be Enable or Disable.
„ After enabling a trunk group, a new trunk port will be created in the port list. For example,
Port2, Port4, and Port6 belong to Trunk 1. Check the other page (Port Status) with port list,
Trk1 port will be added after all normal ports. The member ports of this trunk group will
disappear.
27