Lindy 25010 - Manual (Page 48)

2.11.1 Firmware Update
The 24G web smart switch provides the facility to update firmware for new features, customized
requests and system fault recovery. The page, shown as below, can be activated by clicking the
Update link on the System Setup page.
This system supports both BOOTP/TFTP and pure TFTP to update the firmware. The TFTP server
IP address and firmware filename needs to be correctly provided to the switch to start the firmware
updating if the pure TFTP way, is selected. Using the BOOTP/TFTP it is much easier to do the
firmware updating because no parameters need to be input if the BOOTP/TFTP server is correctly
setup.
47