Lochinvar Harmony - Manual (Page 16)

16
LEAD STAGE
Used to manually change the lead stage
• The Lead Stage is the first stage brought on when output is
required.
• The Lead Stage can be rotated manually or automatically. The
automatic rotation is recommended (see pg. 17).
• The current Lead Stage is shown in brackets on the main display.
• Only Stages which are set to Auto Mode can be Lead. Therefore,
not all the stages may be available when manually selecting a new
Lead Stage.
--- SETTINGS ---
Gain
>Lead Stage
<Stage Settings>
--- LEAD STAGE ----
>A
B
C
--- LEAD STAGE ----
A
>B
C
PRESS TO SELECT
ADJUST
Press to
show
setting
PRESS TO SELECT
ADJUST
Turn to
adjust
value
PRESS TO SELECT
ADJUST
Press to
select
new
LEAD STLEAD STLEAD STLEAD STLEAD ST
AAAAA
GEGEGEGEGE