Lochinvar Harmony - Manual (Page 24)

24
Modulating Mode - PARALLEL
• The Modulation Point should be set to the value where the unit runs
most efficiently.
• Contact the manufacturer to determine the appropriate setting.
COPY SETTINGS - STAGE A ONLY
• If all the active Stages will have the same Ignition Start Point and
Modulation Point, they can be set for Stage A and then copied to
the other Stages.
• It is still required to select the Mode for all other Stages. The Mode
will not be copied.
IMPORTANT: The Mode MUST be set for each stage. The Copy
Settings command will not set the Mode for Stages B, C, and D.
STSTSTSTST
AAAAA
GE SETTINGSGE SETTINGSGE SETTINGSGE SETTINGSGE SETTINGS