Troubleshooting & repair, Alternator rotor test (continued) – Lincoln Electric CLASSICII SVM125-A User Manual
Page 64
TROUBLESHOOTING & REPAIR
F-14
F-14
CLASSIC II
LOOSEN 5
SCREWS
ALTERNATOR
COVER
SLIP
RINGS
BRUSHES
FIGURE F.1 – ALTERNATOR COVER REMOVAL
ALTERNATOR ROTOR TEST
(continued)
TEST PROCEDURE
1. Turn engine off.
2. With the 3/8" socket wrench, remove the
left case side.
3. Unlatch, lift and secure the right side door.
Note that there are latches at both ends of
the door.
4. With the 3/8" nut driver or socket wrench,
loosen the two screws on the left side of
the alternator cover. See Figure F.1.
5. With the 3/8" socket wrench, remove the
screw and lock washer from the top center
of the alternator cover. See Figure F.1.
6. With the 3/8" socket wrench, loosen the
two screws on the right side of the alterna-
tor cover.
7. Remove the alternator top cover. Be care-
ful to clear the leads.
8. Locate and lift the brushes off of the rotor
slip rings. See Figure F.1.