Troubleshooting & repair – Lincoln Electric CLASSICII SVM125-A User Manual
Page 84
Advertising
TROUBLESHOOTING & REPAIR
F-34
F-34
CLASSIC II
ALTERNATOR ROTOR REMOVAL
AND REPLACEMENT
(continued)
FIGURE F.13 – OUTPUT TERMINAL STRAP AND CASE FRONT REMOVAL
NEGATIVE OUTPUT
TERMINAL (COPPER
STRAP ON REAR SIDE)
See Figure F.13 for steps 16 - 17.
16. With the 3/4" wrench, remove the copper
strap from the negative output terminal.
Clear the strap from cable ties.
17. Carefully lift the case front assembly up from
the bottom and carefully slide the assembly
"up" onto the fuel tank mounting rails. Make
sure all leads are clear. Cut any necessary
cable ties.
Advertising