Perle Systems IOLAN CSS - Manual (Page 127)

Time Commands 123
Time/Date Setting Commands
Show SNTP
Show SNTP-Info
Time/Date Setting Commands
Set Date
Set Summertime
server-1
The name of the primary SNTP server from the IOLAN host table. Valid with Unicast
and Multicast modes, although in Multicast mode, the IOLAN will only accept
broadcasts from the specified host SNTP server.
server-2
The name of the secondary SNTP server from the IOLAN host table. Valid with
Unicast and Multicast modes, although in Multicast mode, the IOLAN will only accept
broadcasts from the specified host SNTP server.
version
Version of SNTP. Valid values are 1 to 4. Default value is 4 .
Description Shows the SNTP settings.
User Level Admin
Syntax
show sntp
Description Shows current SNTP information.
User Level Admin
Syntax
show sntp-info
Description Sets the IOLAN’s system clock.
User Level Admin
Syntax
set date <dd/mm/yyyy>
Description Sets the summertime clock.
User Level Admin
Syntax
set summertime [mode none|fixed|recurring] [name <text>]
[offset <hh:mm>]
Options mode
You can configure the summer time to take effect:
z None—No summer time change.
z Fixed—The summer time change goes into effect at the specified time every year.
For example, April 15 at 1:00 pm.
z Recurring—The summer time changes goes into effect every year at same relative
time. For example, on the third week in April on a Tuesday at 1:00 pm.
< name >
The name of the configured summer time zone; this will be displayed during the
summer time setting. Maximum 4 characters and minimum 3 characters (do not use
angled brackets < >). If this parameter is not set, then the summertime feature will not
work.