Perle Systems IOLAN CSS - Manual (Page 58)

Commands for Users Logged Into the IOLAN
56 IOLAN SDS/SCS/STS CLI Reference Guide, Version 3.6
Syslog Console
Show Sessions
Show Termtype
Start
ssh-2-cipher-list
Select the order of negotiation for the encryption method (ciphers) that the IOLAN will
use for the SSH version 2 connection:
z 3DES
z Blowfish
z AES
z Arcfour
z CAST
user
The name of the user logging into the SSH session.
verbose
Displays debug messages on the terminal.
Description Starts/stops or displays the status of the syslog console.
User Level Admin
Syntax
syslog console start|stop
syslog console status
Options start|stop
Start or stop console logging. When console logging is enabled, syslog messages will
be echoed to the current console. These messages are filtered based on the level set in
the (remote) syslog options.
status
Displays the current console logging status (enabled or disabled).
Description Shows available sessions.
User Level Restricted, Normal, Admin
Syntax
show sessions
Description Shows the terminal type for the current session.
User Level Admin
Syntax
show termtype
Description Starts a predefined session. Only inactive sessions are displayed.
User Level Restricted, Normal, Admin
Syntax
start 1|2|3|4
Options 1|2|3|4
The number of the session that you want to start.