Show authentication, Trueport baud commands, Set trueport remap-baud – Perle Systems IOLAN CSS User Manual
Page 40: Show trueport, Set trueport remap-baud show trueport
TruePort Baud Commands
40
IOLAN SDS/SCS/STS CLI Reference Guide, Version 3.6
Show Authentication
TruePort Baud Commands
Set TruePort Remap-Baud
Show TruePort
Description Shows the authentication settings. If you type just the
show authentication
command, the configured primary and secondary authentication methods are displayed.
User Level Admin
Syntax
show authentication radius|ldap|tacacs+|nis|kerberos|securid
Option
radius
|
ldap
|
tacacs+
|
nis
|
kerberos
|
securid
Displays the authentication settings for the specified authentication method.
Description This command allows for the remapping of the baud rate being specified by the Serial
application to a different value on the physical serial port on the IOLAN.
User Level Admin
Syntax
set trueport remap-baud
50|75|110|134|150|200|300|600|1200|1800|2400|4800|9600|19200|
38400
50|75|110|134|150|200|300|600|1200|1800|2400|4800|9600|19200|
38400|57600|115200|230400|28800|[custom <baud_rate]
Options
50|75|110|134|150|200|300|600|1200|1800|2400|4800|9600|19200|38400
The configured baud rate of the TruePort client.
50|75|110|134|150|200|300|600|1200|1800|2400|4800|9600|19200|38400|
57600|115200|230400|28800|[custom <baud_rate>]
The actual baud rate that runs between the IOLAN and the connected serial device. You
can also specify a custom baud rate; valid values are 50 - 1843200.
Description Shows the IOLAN TruePort remapping table.
User Level Normal, Admin
Syntax
show trueport