Set ssh-client – Perle Systems IOLAN CSS User Manual
Page 80
Line Service Commands
78
IOLAN SDS/SCS/STS CLI Reference Guide, Version 3.6
Set SSH-Client
echo
Defines the echo character. When
Line
Mode
is
On
, typing the echo character echoes
the text locally and sends only completed lines to the host. This value is in hexadecimal
with a default value of
5
(ASCII value
^E
).
eof
Defines the end-of-file character. When
Line Mode
is
On
, entering the EOF character
as the first character on a line sends the character to the remote host. This value is in
hexadecimal with a default value of
4
(ASCII value
^D
).
erase
Defines the erase character. When
Line Mode
is
Off
, typing the erase character erases
one character. This value is in hexadecimal with a default value of
8
(ASCII value
^H
).
intr
Defines the interrupt character. Typing the interrupt character interrupts the current
process. This value is in hexadecimal with a default value of
3
(ASCII value
^C
).
quit
Defines the quit character. Typing the quit character closes and exits the current telnet
session. This value is in hexadecimal with a default value of
1c
(ASCII value
FS
).
escape
Defines the escape character. Returns you to the command line mode. This value is in
hexadecimal with a default value of
1d
(ASCII value
GS
).
Description Configures the SSH parameters for the specified line. When the IOLAN initiates a SSH
connection to a host, it is acting as a SSH client.
User Level Normal, Admin
Syntax
set ssh-client line .|<number>|* [termtype <terminal_name>]
[protocol ssh-1|ssh-2|ssh-2/1] [compression on|off]
[verbose on|off] [auto-login on|off] [name <string>]
[password <string>] [ssh-1-cipher 3des|des|blowfish]
[authentication rsa on|off] [authentication dsa on|off]
[authentication keyboard-interactive on|off]
set ssh-client line .|<number>|*
ssh-2-cipher-list <3des blowfish cast aes arcfour>
Options
termtype
Type of terminal attached to this line; for example, ANSI or WYSE60.
protocol
Specify the SSH protocol you want to use for the connection, SSH-1, SSH-2, or either,
SSH2/1.
compression
Requests compression of all data. Compression is desirable on modem lines and other
slow connections, but will only slow down things on fast networks.
verbose
Displays debug messages on the terminal.