Perle Systems IOLAN CSS - Manual (Page 23)

Server Commands 23
Server Commands
Set Server
Description Sets server parameters.
User Level Admin
Syntax
set server [auto-obtain-dns on|off] [auto-obtain-gw on|off]
[auto-obtain-wins on|off] [banner on|off] [break on|off]
[bypass-password on|off] [dhcp-update-dns on|off]
[domain <string>] [flush-on-close on|off]
[line-menu-string <string>] [monitor-connection-every <1-32767>]
[name <string>] [netmask <IPV4_address>] [oem-login on|off]
[password-limit <0-10>] [prompt-with-name on|off]
[ip-filter on|off] [session-escape-string <string>]
[single-telnet on|off] [monitor-connection-every <seconds>]
[active-standby on|off] [miimon <milliseconds>]
[updelay <milliseconds>] [power-management-menu-string <string>]
set server internet [eth1|eth2] <IPV4_address> [netmask]
set server internet [eth1|eth2] dhcp/bootp on dhcp-update-dns on
domain-prefix <text>
set server internet [eth1|eth2] dhcp/bootp on dhcp-update-dns off
set server internet [eth1|eth2] dhcp/bootp off <IPV4_address>
[<netmask>]
set server tftp [retry <integer>] [timeout <integer>]
set server ssl-passphrase
Options auto-obtain-dns
When DHCP/BOOTP is enabled, you can enable this option to have the IOLAN receive
the DNS IP address from the DHCP/BOOTP server.
auto-obtain-gw
When DHCP/BOOTP is enabled, you can enable this option to have the IOLAN receive
the Default Gateway IP address from the DHCP/BOOTP server.
auto-obtain-wins
When DHCP/BOOTP is enabled, you can enable this option to have the IOLAN receive
the WINS IP address from the DHCP/BOOTP server.
banner
This parameter concerns the banner information (product name/software version). This
banner information is presented to a user with a login prompt. For security reasons, you
can turn off the display of this information. The default is
Off .
break
Enables/disables proprietary inband SSH break signal processing as well as the existing
Reverse Telnet break signal. This parameter can also enable/disable the out-of-band
break signals for TruePort. The default value is
Off .
bypass-password
When set, authorised users who do not have a password set, with the exception of the
Admin user, WILL NOT be prompted for a password at login with
Local
Authentication .