Perle Systems IOLAN CSS - Manual (Page 60)

Configuring Users
58 IOLAN SDS/SCS/STS CLI Reference Guide, Version 3.6
Version
Configuring Users
Add User
Delete User
escape
Defines the escape character. Returns you to the command line mode. This value is in
hexadecimal with a default value of
1d (ASCII value GS ).
Description Displays firmware version and build.
User Level Normal, Admin
Syntax
version
Description For units with 4 or less serial ports, you can configure up to 4 users. For units with 8 or
more serial ports, the maximum number of users which can be added is 48. This is in
addition to the
admin user.
User Level Admin
Syntax
add user <username>
Option <username>
The name of the user, without spaces. When you finish the command and press Enter,
you will be prompted to enter and re-enter a password for the user.
Description Deletes a user.
User Level Admin
Syntax
delete user <config_user>
Option <config_user>
You can see a list of users that can be deleted by typing delete user ? . You can not
delete the admin user.