Set modem, Set termtype, Show line – Perle Systems IOLAN CSS User Manual
Page 78: Set modem set termtype show line
Line Commands
76
IOLAN SDS/SCS/STS CLI Reference Guide, Version 3.6
Set Modem
Set Termtype
Show Line
Description Sets the modem initialization strings for a defined modem. If you wish to add a new
modem, use the
add modem
command.
User Level Admin
Syntax
set modem <modem_name> <init_string>
Options
<modem_name>
Predefined modem name.
<init_string>
Specify the initialization string for the modem. This can be up to 60 characters long, but
cannot include spaces.
Description Sets the terminal type for the current terminal session. term1, term2, and term3 refer to
the user-uploadable custom terminal definitions. If these are not present, the default is
wyse60.
User Level Restricted, Normal, Admin
Syntax
set termtype
[wyse60|vt100|ansi|dumb|tvi925|ibm3151te|vt320|hp700|term1|term2
|term3]
Option
wyse60|vt100|ansi|dumb|tvi925|ibm3151te|vt320|hp700|term1|term2|term3
Specifies the type of terminal connected to the line:
z
Dumb
z
WYSE60
z
VT100
z
ANSI
z
TVI925
z
IBM3151TE
z
VT320 (specifically supporting VT320-7)
z
HP700 (specifically supporting HP700/44)
z
Term1, Term2, Term3 (user-defined terminals)
Description Shows the line settings/information.
User Level Admin
Syntax
show line <number>|*