Performance statistics – Paradyne U8777 User Manual
Page 63
7. Monitoring and Troubleshooting
8700-A2-GB20-40
May 2002
7-11
Performance Statistics
Performance statistics can assist you in determining the duration of specific
conditions and provide a historical context for problem detection and analysis.
Statistics are maintained for up to 96 15-minute intervals (24 hours).
Select a port to view the performance statistics. Port 1 is the default.
Use the applicable virtual function keys to page through the intervals and clear
statistics.
T
Select PgUp or PgDn to view more statistics.
T
Select ClrNear or ClrFar to clear the near- and far-end statistics to zero.
T
For DSX-1 and G.703 statistics, select ClrStats to clear all statistics to zero.
Limit of six Login IDs
reached
An attempt to enter a new
login ID was made, and the
limit of six login/password
combinations has been
reached.
1. Delete another
login/password combination.
2. Re-enter the new login ID.
No Security Records to
Delete
Delete was selected from the
Administer Login screen, and
no security records had been
defined.
T
No action is needed.
T
Enter a security record.
Password Matching
Error – Re-enter
Password
Password entered in the
Re-enter Password field of
the Administer Logins screen
does not match what was
entered in the Password
field.
T
Try again.
T
Contact your system
administrator to verify your
password.
Please Wait
Command takes longer than
5 seconds.
Wait until message clears.
Test Active
A test is running and no
higher priority health and
status messages exist.
T
Contact service provider if
test initiated by the network.
T
Wait until the other test ends
and message clears.
T
Cancel all tests from the Test
screen.
T
Stop the test from the same
screen the test was started
from.
Table 7-4.
Device Messages (2 of 2)
Device Message
What Message Indicates
What To Do