Paradyne U8777 - Manual (Page 87)

8. Testing
8700-A2-GB20-40 May 2002 8-9
Device Tests
The Device Tests branch is only used to access the card-level test, the Lamp Test.
To access the Device Tests screen, follow this menu selection sequence:
Main Menu
→
Test
→
Device Tests
Lamp Test
The Lamp Test determines whether all LEDs are lighting and functioning properly.
Procedure
To test the LEDs:
1. Position the cursor at the Start command next to Lamp Test on the Device
Tests screen.
2. Press Enter.
The Start command is changed to Stop. During the Lamp Test, all LEDs blink
simultaneously every second.
3. To stop the Lamp Test, position the cursor at the Stop command. The LEDs
are restored to their normal condition.
4. Press Enter.
main/test/card
Model: 87xx
DEVICE TESTS
Test Command Status
--------------------------------------------------------------------------------
Lamp Test: Start Inactive
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit