Paradyne U8777 User Manual
Page 93
Advertising
9. Transferring Firmware and Configurations Using TFTP
8700-A2-GB20-40
May 2002
9-3
Procedure
To apply the downloaded firmware:
1. Press the Escape key to return to the Control menu. Select Apply Download.
2. On the Apply Download screen, type Yes to reset the card and activate the
code.
Selecting Yes causes the termination unit to reset.
NOTE:
The termination unit has two flash memory banks to hold executable firmware.
You can switch between these two firmware versions by applying the firmware
listed on the Apply Download screen.
Advertising
This manual is related to the following products: