Paradyne U8777 - Manual (Page 81)

8. Testing
8700-A2-GB20-40 May 2002 8-3
Use the Command column to start or stop a test. When the Status column shows
that a test is Inactive,
Start is displayed; when a test is Active, Stop is displayed.
Position the cursor at the desired Start or Stop command and press Enter. The
Results column displays the test duration.
Selecting Abort All Tests from the Test menu will not disrupt a Send and Monitor
511 test. When the Send and Monitor 511 test is active, ResetMon is available to
reset the error counter to zero.