Panasonic CQ-VD7001U - Manual (Page 25)

48 47
48 49 CQ-VD7001U CQ-VD7001U
Settings
(continued)
English English
[MENU] [MODE] []] [[] [}] [{] [ENTER]
: Previous menu
: Previous menu
: Quit
: Quit
: Select/adjust
: Select/adjust : Determine [MENU] [MODE] []] [[] [}] [{] [ENTER]
: Previous menu
: Previous menu
: Quit
: Quit
: Select/adjust
: Select/adjust : Determine
PAL/NTSC SELECT
PAL/NTSC selection
: sets NTSC in accordance with the equipment
connected to VTR-IN.
: sets PAL in accordance with the equipment
connected to VTR-IN.
default:
: sets NTSC in accordance with the equipment
connected to CAMERA-IN.
: sets PAL in accordance with the equipment
connected to CAMERA-IN.
default: NTSC
PAL
NTSC
(Camera terminal setting) CAMERA
NTSC
PAL
NTSC
(VTR terminal setting) VTR
FM SETUP
Setting for FM stations
: adjusted automatically
: narrows the frequency bandwidth to be
received to prioritize noise reduction.
: widens the frequency bandwidth to be
received to prioritize sound quality.
default:
: saves the preset stations in each band.
: saves the preset stations in all FM lists regard-
less of band.
default: EACH
ALL
EACH
(Auto preset setting) AUTO PRESET
AUTO
WIDE
NARROW
AUTO
(FM IF filter switching) NOISE SUPPRESSION
AM SETUP
Setting for AM stations
: narrows the frequency bandwidth to be
received to prioritize noise reduction.
: goes between and .
: widens the frequency bandwidth to be
received to prioritize sound quality.
default: MID
WIDE
WIDE NARROW MID
NARROW
(Noise suppression) NOISE SUPPRESSION
XM CATEGORY
Category setting
: enables category switching
: disenables category switching
default:
Note:
¡ Channel selection while
is set is performed within
the same category. ( a page 37)
ON
OFF
OFF
ON
(Category setting) XM CATEGORY
RADIO
INPUT/OUTPUT DVD AUDIO SCREEN USER (INPUT/OUTPUT continued)
INPUT SELECT
Input selection
: connected to the RGB input cord, or a
car navigation system not connected
: connected to the VTR-IN
default: RGB
VTR
RGB
(Navigation Input) NAVI INPUT
: unconnected
: connected to VTR-IN
: connected to CAMERA-IN
default:
Note:
¡The audio output should be connected to CH/AUX-IN.
OFF
CAMERA
VTR
OFF
(Video input for DVD Changer) CH VIDEO INPUT
OUTPUT SELECT
Output Selection
You can have different picture and sound on the front and
rear monitors at the same time.
Preparation: Connect another optional rear monitor.
(e.g. CY-VHD9500U) (
a Installation Instruction)
: same as front monitor
: DVD/VCD/CD/MP3/WMA
: VTR
default:
Note:
¡This menu can also be opened by touching/pressing and
holding /[MENU].
¡For CD/MP3/WMA, the screen becomes blue.
¡Images are not displayed on the rear monitor in the DVD
changer mode even if is selected.
This function allows the background camera view to be displayed
at the all times.
: background camera view is always on the display.
: each mode image is on the display.
default: OFF
OFF
ON
(Always display background
camera on the display) BACK GROUND CAMERA
AUTO
AUTO
VTR
DVD
AUTO
(Rear Monitor Set up) REAR MONITOR
CAMERA SETUP
Rear View Camera set up
Selection of the terminal that connects to the rear view
camera.
Preparation: Connect the reverse lead. ( a Installation
Instructions)
: unconnected
: connected to the CAMERA-IN
default:
Note:
¡Make sure to select
when no rear view camera is
connected.
OFF
OFF
ON
OFF
(Rear view camera set up) CAMERA
Images through the rear view camera can be shown in
scale display mode.
: scale display off
: scale display on
default: OFF
ON
OFF
(Rear view camera scale) SCALE
or : adjust [ ]
(Scale adjustment) SCALE ADJUST
MODE SKIP
Mode skip
If a VTR is not used, the VTR mode is skipped when chang-
ing the mode.
: do not skip
: skip VTR
default:
If a AUX is not used, the AUX mode is skipped when
changing the mode.
: do not skip
: skip AUX
default: OFF
ON
OFF
(AUX skip) AUX SKIP
OFF
ON
OFF
(VTR skip) VTR SKIP